A lot of homeowners like having HVAC installed within their home. This unit will regulate the temperature in your home. Since the HVAC unit has machinery, the installation and maintenance will often require professional contractors or technicians. The following tips will help you understand how to handle your HVAC unit.
Know the name and type of your HVAC system before looking for a repair person. Know what the manufacturer’s name is, which particular model you have and what’s gone on with the unit in the past. This helps make sure the contractor has the information they will need.
In order to keep your outside condenser fan running efficiently, make sure the coils and the fan blades are cleaned before the cooling season begins. Before you clean the unit, be sure to turn off the power. Take away all of the debris as well.
If you have outside condenser units, make sure to regularly clean the debris that builds up. Falling leaves and wind or rain may cause debris to reduce the efficiency of your unit. Left unchecked, your unit is more likely to break down.
Clean the fan blades and coils on the condenser fan every spring. First, the power should be turned off so things don’t move as you work. Then you need to get the grill popped off and get the blades out so you can clean them and your unit gently.
When you cut the grass, don’t cover the outdoor units with their clippings. Direct the grass clippings in a direction away from the HVAC unit. When blowing leaves, do the same. Always take care when passing your HVAC units while moving leaves, grass or other debris.
Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. You can easily find the ports as they have a rubber or metal cap. Pick out a SAE 20 type of oil because it has no detergent, is lightweight, and you should put around 10 drops in the ports but make it to where they don’t get too full.
When choosing the area for placing an outdoor compressor device, place it in a shady area. When your unit is bringing in cool air, it will not have to work as hard to cool the air as it moves it inside, boosting efficiency.
To boost the efficiency of your HVAC system, you should put your unit in a shady place. This will ensure cool air is sucked in, meaning less cooling must be done by the unit.
A good way to save money with your air conditioning is by installing a programmable thermostat. If you adjust it to keep the house a little warmer or a little cooler during the time you are sleeping, you may see your energy bill go down by as much as ten percent. Some can even be controlled from a computer.
You can help your HVAC unit help you. You need to be sure that the system is properly installed, maintained and working how it should. Take the solid ideas from the above article to ensure that you know the best way to have an HVAC unit installed, and there is proper maintenance done.